125

Show Filters

Showing 1–12 of 24 results

    • New Bezel and stackable feature!
    • Dependable IGBT inverter
    • Single Phase/Three Phase, 220V only
    • DC Stick/TIG functions
    • High Frequency and Lift TIG start
    • Foot Pedal included
    • VRD function
    • Adjustable hot start and arc force controls
    • 2T/4T TIG controls
    • Built in gas solenoid
      • Compact IGBT inverter design for maximum performance
      • Adjustable Hot Start to improve arc starting and reduce sticking
      • Adjustable Arc Force Control to maximize arc performance
      • Smooth, stable arc with any type electrode
      • DC lift TIG function adds versatility for welding Steel, and Stainless
      • Dedicated E6010 setting for optimized performance with cellulose based rods (Short Arc)
      • Industrial class duty cycle of 60% @ 300 Amps
      • New Bezel and stackable feature!
      • Digitally Controlled IGBT Inverter
      • HV/HF arc starting: No Points to adjust.
      • Analog style control
      • 120V/240V Dual Voltage
      • Industrial 60% Duty Cycle at 200 amps
      • AC/DC TIG
      • DC Stick functions
      • HF and Lift TIG start
      • Pulse up to 150Hz in AC or DC
      • Standard Advanced AC Square Wave
      • Arc force control for Stick
      • Unit Dimensions: 25" x 10" x 18"
    • HV/HF arc starting: No Points to adjust.
    • Fan on Demand upon arc start (**Water Cooler will still run continuously**)
    • Equipped with Everlast #18 Series (water cooled) TIG torch - 4m
    • (water cooler sold seperately)
    • 240V IGBT Module inverter design
    • Digital Microprocessor Control
    • Commercial 60% Duty Cycle at 250Amps
    • AC/DC TIG
    • DC Stick functions
    • Improved HF Start
    • AC Frequency/Balance control
    • AC Advanced Square
    • AC/DC pulse
    • Unit Dimensions: 23" x 9.5" x 18"
    • HV/HF arc starting: No Points to adjust.
    • Fan on Demand upon arc start (**Water Cooler will still run continuously**)
    • 120/240V IGBT Module inverter design
    • Digital Microprocessor Control
    • Commercial 60% Duty Cycle at 210 Amps
    • 240V Outlet in rear for optional WC375 water cooler
    • AC/DC TIG/DC Stick functions
    • Improved HF Start
    • AC Frequency/Balance control
    • 3 wave AC Wave forms, Advanced Square, Soft Square, and Triangular
    • Standard and Advanced AC pulse
    • Adjustable Stick Hot Start/Arc Force
    • 9 Channel Programmable Memory
    • Unit Dimensions: 25" x 10" x 18"
    • HV/HF arc starting: No Points to adjust.
    • Fan on Demand upon arc start (**Water Cooler will still run continuously**)
    • Rugged Digital IGBT Inverter
    • Industrial 60% Duty Cycle at 250 Amps
    • AC/DC TIG
    • DC Stick functions
    • #20 water cooled included (water cooler sold separately)
    • HF or Lift TIG start
    • Pulse up to 500 Hz DC; 250 Hz AC
    • Advanced Square, Soft Square, Triangular
    • 1 phase input, 220/240 v
    • New Feature: Spot Timer
    • HV/HF arc starting: No Points to adjust.
    • Fan on Demand upon arc start (**Water Cooler will still run continuously**)
    • Rugged Digital IGBT Inverter
    • AC/DC TIG
    • DC Stick functions
    • HF or Lift TIG start
    • Pulse up to 500 Hz DC; 250 Hz AC
    • 240V Outlet in rear for optional WC375 water cooler
    • #20 water cooled included (water cooler sold seperately)
    • Advanced Square, Soft Square, Triangular, and Sine wave forms
    • Adjustable Stick Arc force and Hot Start Control
    • Advanced AC Pulse and Standard Pulse AC/DC
    • 9 programmable channels to save favourite settings
     
    • New Cyclone Series!
    • PowerSet MIG Mode
    • LCD Screen
    • Multi-Process: MIG and Stick
    • Spool Gun ready MTS Connection (Not Included)
    • 35% Duty Cycle at 200A
    • Adjustable Arc force and Burn Back Control
    • Up to a 8" spool (12 lbs)
    • Spot Timer
    • Polarity Reminder
    • Pre and Post Flow Control
    • Adjustable Burn back control
    • 600 IPM Wire feed speed 240V
    • 400 IPM Wire feed speed 120V
    • Euro-Quick Connect 15 series gun
    • AK24 North MIG Gun installed with a Red STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/0.045") (subject to change)
    • 120V/240V Dual voltage
    • Preflow and Post flow
    • New Cyclone Series!
    • PowerSet MIG Mode
    • LCD Screen
    • Multi-Process: MIG and Stick
    • Spool Gun ready MTS Connection (Not Included)
    • PowerSet Function
    • Spot and Stitch timer
    • Burn back control
    • Start/End Wire Feed Speed
    • Up/Down Slope 2T/4T function
    • Heavy Duty Cast aluminum true driven 4 roll feed mechanism
    • Euro Quick connect series 36 MIG gun (Binzel/Trafimet compatable)
    • AK36 North MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
    • Arc force control useful for fine tuning arc characteristics in MIG and Stick modes
    • Save multiple programs with memory function
    • Holds a 12" (30-44 lbs) roll of welding wire, or can use an 8" (10-12 lbs) with an adapter.
    • Digitally Controlled IGBT Inverter with programmable memory
    • Gas Purge and Wire Jog Functions
    • Run-in Feature
  • Original price was: $2,150.00.Current price is: $1,900.00. View More DetailsAdd to cart
    • Digitally Controlled IGBT Inverter
    • MIG/Stick function (inc.  E6010 - Short Arcs)
    • Standard, Synergic, or Pulse modes
    • Spot/Stitch Timer
    • Spool Gun and Push-Pull Ready (Not Included)
    • 275A MIG/200A Stick maximum output
    • 50% Duty Cycle at 275A MIG/200A Stick
    • .023"-.045" standard wire capability
    • Adjustable inductance/arc force
    • Volt, Amp and Memory displays
    • Use 8" or 12" spools
    • Euro-Quick Connect for the 36 series MIG gun
    • AK36 North  MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060")
    • Aluminum Push/Pull Capable (optional purchases)
    • Digitally Controlled IGBT Inverter
    • MIG/Stick function -Standard, Synergic, Single Pulse, Double Pulse MIG -Stick Function
    • Spool Gun and Push-Pull Ready (Not Included)
    • 250A MIG/250A Stick maximum output
    • 60% Duty Cycle at 250A MIG/250A Stick
    • .030"-.045" standard wire capability for Synergic mode
    • Adjustable inductance/arc force
    • Volt, Amp and Memory displays
    • Use 8" or 12" spools
    • Euro-Quick Connect for the 36 series MIG gun
    • AK36 North MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
    • Aluminum Push/Pull capable
  • Original price was: $1,700.00.Current price is: $1,250.00. View More DetailsAdd to cart
    • This machine is NOT AC Capable(will NOT weld Aluminum).
    • DC ONLY
    • All digital DC CC/CV Multi-Process inverter design offers the perfect welder for nearly every task.
    • 8" Diameter wire spool capacity provides a good compromise for long duration welding and portability.
    • Synergic MIG operation or Standard MIG operation.
    • Easy to use, operator friendly panel to select features.
    • AK24 MIG Gun installed with a Red STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/.045") (subject to change)
    • Adjustable MIG Wave Form control manages slope/ inductance and fine tunes arc characteristics.
    • Adjustable Arc Force Control allows the user to dial in desired Stick welding performance.
    • Adjustable TIG Up/ Downslope allows the user to control the end of the welding cycle.

Showing 1–12 of 24 results