Show Filters

Showing 1–12 of 18 results

    • 60% Duty cycle at 500A CO2 or 350A Mixed Gas
    • 3m cable
    • Water cooled and compatible with Everlast PowerCool W375 & W400
    • Euro quick connect compatible
    • Ergonomically designed
    • Twist off, slide on design
    • easily adjusts stick out of electrode
    • Takes AK36 Tips and Nozzle
    • Requires AK500 Ceramic Diffusers & Tip Holder
    • 60% Duty cycle at 500A CO2 or 350A Mixed Gas
    • 5m cable
    • Water cooled and compatible with Everlast PowerCool W375 & W400
    • Euro quick connect compatible
    • Ergonomically designed
    • Twist off, slide on design
    • easily adjusts stick out of electrode
    • Takes AK36 Tips and Nozzle
    • Requires AK500 Ceramic Diffusers & Tip Holder
    • AK15 North MIG gun - 3m
    • *requires NORTH GUN Tip Holder*
    • Quick connect
    • 180A CO2/150A Mixed CO2/Ar @ 60% Duty Cycle
    • Installed with a Blue STEEL Liner for wire sizes 0.6/0.8mm (.023/.030") (subject to change)
    • 3m cable, air cooled-Euro quick connect compatible
    • Ergonomically designed
    • AK15 North MIG gun - 5m
    • *requires NORTH GUN Tip Holder*
    • Quick connect
    • 180A CO2/150A Mixed CO2/Ar @ 60% Duty Cycle
    • Installed with a Blue STEEL Liner for wire sizes 0.6/0.8mm (.023/.030") (subject to change)
    • 5m cable, air cooled-Euro quick connect compatible
    • Ergonomically designed
    • 250A CO2/220A Mixed CO2/Ar @ 60% Duty Cycle
    • *requires NORTH GUN Tip Holder*
    • 3m cable, air cooled-Euro quick connect compatible
    • Installed with a Red STEEL Liner for wire sizes 0.9/1.2mm (.035/.045") (subject to change)
    • Ergonomically designed
    • Twist off, slide on design easily adjusts stick out of electrode
    • Compatible with Everlast MIG Units
    • 250A CO2/220A Mixed CO2/Ar @ 60% Duty Cycle
    • 5m cable, air cooled - Euro quick connect compatible
    • Installed with a Red STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/.045") (subject to change)
    • Ergonomically designed-Twist off, slide on design
    • easily adjusts stick out of electrode
    • Compatible with Everlast MIG units
    • 340A CO2/320A Mixed CO2/Ar @ 60% Duty Cycle
    • 3m cable
    • *requires NORTH GUN Tip Holder*
    • air cooled
    • Installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
    • Euro quick connect compatible
    • Ergonomically designed
    • Twist off, slide on design
    • Easily adjusts stick out of electrode
    • 340A CO2/320A Mixed CO2/Ar @ 60% Duty Cycle
    • 4m cable
    • *requires NORTH GUN Tip Holder*
    • air cooled
    • Installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
    • Euro quick connect compatible
    • Ergonomically designed
    • Twist off, slide on design
    • Easily adjusts stick out of electrode
    • 340A CO2/320A Mixed CO2/Ar @ 60% Duty Cycle
    • *requires NORTH GUN Tip Holder*
    • 5m cable
    • air cooled
    • Installed with a Yellow STEEL Liner for wire sizes 1.2/1.6mm (.045/.060") (subject to change)
    • Euro quick connect compatible
    • Ergonomically designed
    • Twist off, slide on design
    • Easily adjusts stick out of electrode
    • PowerSpool Series
    • For Power I-MIG welders and other brands with euro connectors
    • 0.8mm (.030") Roller Equipped (Additional Wire Size require additional rollers) *Subject to change*
    • GMAW (MIG)
    • PowerSpool Series
    • For Power MTS welders and other brands with euro connectors
    • 0.8mm (.030") Roller Equipped (Additional Wire Size require additional rollers) *Subject to change*
    • GMAW (MIG) 
    • 300 amps CO2/270 amps mixed @ 60% duty cycle
    • .030" - .045" wire diameter drive rolls available.
    • Equipped with a 1.0mm (.040) roller. *Subject to change*
    • Roll diameter max: 4" - AK36 series consumable
    • Recommended for use with Power i-MIG 230i, 275S, 275P and PowerMTS 251Si
    • Not for use with Power i-MIG 140E, 200, 210, MTS211Si
    • Speed Control in Handle (Note: Speed Control does not work on Standard MIG Units, this feature will only work on MTS and Power I-MIG 230i and 275P)
    • 6 Metre Whip.

Showing 1–12 of 18 results