The Power i-MIG 253DPi features the latest in inverter based, pulse MIG technology. This welder is ideal for welding aluminum and bronze brazing activities in the automotive industry. It features two types of synergic pulses: Single and Double. In shops such as auto body repair, where new alloys require special welding and brazing processes to repair frames and panels safely, Single Pulse is perfect for control heat and wet in and burn through of heat sensitive metals where HAZ issues are a concern. With Single pulse, increased production speed welds are possible without overmelting, allowing for out of position welding of aluminum. Double pulse features a “stair-stacked” pulse which features the ability to stack the single pulse into two basic layers, helping to form a “stack of dimes” TIG look in the weld. This is ideal for welds where appearance and strength are of equal importance and is required for best possible appearance without resorting to TIG. The unit can also be used in a synergic MIG mode without pulse and a basic non-pulse, non synergic mode as well, where full control over all parameters are possible manually. To prevent crater cracking and cold starts, the unit has several features which include slope up, hot start and down slope. Pre and post flow are standard features as well, which help prevent porosity at the beginning and end of welds where flaws are common. If you find a program you like in a manual setup mode, you can easily save it with the unit’s capacity to store 9 major programs. The unit is programmed with a possible 40 different, well designed and tested synergic programs for standard and pulse MIG operation. Companies and individuals who are looking for the consumate professional MIG machine will appreciate the ability to fine tune the arc even while in synergic mode, which is a characteristic of all Everlast synergic capable MIGs. The Power i-MIG 253DPi is competetively prices, making this one of the most affordable and capable pulse MIG welders on the market. There’s no longer any need for a company or individual to spend $10,000 or more on a special welding machine to repair modern alloys. The machine can be used to weld aluminum, bronze, steel, or stainless. The Supplied AK36 MIG Gun is installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060″) (subject to change) When welding aluminum, the standard gun works well, but an optional spool gun or push-pull gun can be used to feed wire from .030″ to .045″ in diameter.
Bundle Package: PowerTIG 210EXT + PowerPlasma 52i
$3,300.00
Bundle Package: PowerCyclone 262 & MIG Cart
$1,975.00
Bundle Package: Power I-MIG 253DPi & MIG Cart
$2,725.00
- Digitally Controlled IGBT Inverter
- MIG/Stick function -Standard, Synergic, Single Pulse, Double Pulse MIG -Stick Function
- Spool Gun and Push-Pull Ready (Not Included)
- 250A MIG/250A Stick maximum output
- 60% Duty Cycle at 250A MIG/250A Stick
- .030"-.045" standard wire capability for Synergic mode
- Adjustable inductance/arc force
- Volt, Amp and Memory displays
- Use 8" or 12" spools
- Euro-Quick Connect for the 36 series MIG gun
- AK36 North MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
- Aluminum Push/Pull capable
Out of stock
| Features & Benefits |
|
|---|---|
| What's Included |
|
| Tech Specs |
Type:
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, Stick
Voltage/phase:
220/240 V 1 PHASE
Max Rated MIG Amps:
250A
Max Rated Stick Amps:
250A
MIG Amps/Volts @ Rated Duty Cycle:
Stick Amps/Volts @ Rated Duty Cycle:
Max Inrush ( I1MAX ) Amps:
45.5A
Maximum Rated (I1EFF ) Input Amps:
36A
OCV:
80V
MIG Output Range:
40-250A/ 16-30V
Stick Output Range:
10-250A/20.4-30V
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes, Optional (Not Included)
Pulse:
Double/Pulse on Pulse
Pulse Frequency:
10-250 Hz Single Pulse Mode, 0-9.9 Hz Double Pulse
Pulse Time On:
Synergically controlled
Pulse Volts:
Synergically controlled with Voltage offset
Standard Drive Roll wire size:
.040" and greater
Separate wire feeder:
No, self contained
Number of Drive rollers:
4
Max Wire Feed Speed:
600IPM
Max Wire Roll Diameter:
12" (full size up to 44lb)
Memory:
Yes
Preflow time:
0-10S
Post Flow Time:
0-10S
Flux Core:
Yes, Optional
2T/4T /Torch latch/Trigger:
Yes
Other Features:
|
| Minimum Maximum |
|
| Optional Equipment |
|
Related products
-
- New Bezel and stackable feature!
- Rugged Digital IGBT Inverter
- Industrial 60% Duty Cycle at 250 Amps
- AC/DC TIG
- DC Stick functions
- #20 water cooled included
- WC375 WATER COOLER
- PROCART
- HF or Lift TIG start
- Pulse up to 500 Hz DC; 250 Hz AC
- Advanced Square, Soft Square, Triangular
-
- PowerSET function for easy MIG, AC-DC TIG, and DC Setup
- All digital AC/DC Multi-Process inverter design offers the perfect welder for nearly every task.
- Easy to use, operator friendly panel to select features.
- 60% Duty Cycle @ 200A TIG
- Euro Quick connect series 36 MIG gun (Binzel/Trafimet compatable)
- AK24 North MIG Gun installed with a RED STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/.045") (subject to change)
- Adjustable MIG Wave Form control manages slope/ inductance and fine tunes arc characteristics.
- Adjustable Arc Force Control
- Adjustable TIG Up/ Downslope
- Spool Gun Capable for MIG (Not Included)
- Exclusive 9 channel memory function allows favorite settings to be stored for quick setup.
- Unit Dimensions: 26" x 11" x 16"
-
- Advanced Digital IGBT Inverter Technology.
- HD (720) 5.1" LCD color screen with easy to read contrast.
- Intuitive navigation and layout of settings.
- #20 water cooled included
- Power Factor Correction.
- 240V 1 and 3 Phase operation.
- F.A.C.C.T. (Fan and Cooler Control Technology)
- 5 AC Wave forms: Adv. Square, Soft Square, Trapezoid, Triangle, and Sine.
- Split AC Wave form control technology. Select wave form shape of individual half-waves in AC.
- Independent Amplitude Control over EN and EP Amps in AC.
- DC Wave form shaping for more control.
- DC Pulse up to 999.9 Hz. AC Pulse up to 400 Hz.
- AC Adv. Pulse (Mixed AC/DC pulse up to 10 Hz) increases Aluminum penetration similar to 500A or greater of standard machines.
- AC frequency up to 400Hz.
- True low amp starts measured at 5A DC and 5A AC.
- Single page layout without hidden menus to access.
- Almost all settings visible at a glance.
- Capacitive HV/HF arc starting: No Points to adjust.
- Selectable to start Electrode Positive or Electrode Negative.
- Selectable for Tungsten size for quicker starts.
- Advanced PowerSet menu makes setup easy and quick.
- 40% Duty Cycle TIG and Stick at max output.
- 330A TIG/ 275A Stick maximum output.
- 30 program memory with lock function to prevent tampering.
-
- New Cyclone Series!
- PowerSet MIG Mode
- LCD Screen
- Multi-Process: MIG and Stick
- Spool Gun ready MTS Connection (Not Included)
- PowerSet Function
- Spot and Stitch timer
- Burn back control
- Start/End Wire Feed Speed
- Up/Down Slope 2T/4T function
- Heavy Duty Cast aluminum true driven 4 roll feed mechanism
- Euro Quick connect series 36 MIG gun (Binzel/Trafimet compatable)
- AK36 North MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
- Arc force control useful for fine tuning arc characteristics in MIG and Stick modes
- Save multiple programs with memory function
- Holds a 12" (30-44 lbs) roll of welding wire, or can use an 8" (10-12 lbs) with an adapter.
- Digitally Controlled IGBT Inverter with programmable memory
- Gas Purge and Wire Jog Functions
- Run-in Feature
