Bundle Package: Power I-MIG 275P & MIG Cart


  • Digitally Controlled IGBT Inverter
  • MIG/Stick function (inc.  E6010 - Short Arcs)
  • Standard, Synergic, or Pulse modes
  • Spot/Stitch Timer
  • Spool Gun and Push-Pull Ready (Not Included)
  • 275A MIG/200A Stick maximum output
  • 50% Duty Cycle at 275A MIG/200A Stick
  • .023"-.045" standard wire capability
  • Adjustable inductance/arc force
  • Volt, Amp and Memory displays
  • Use 8" or 12" spools
  • Euro-Quick Connect for the 36 series MIG gun
  • AK36 North  MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060")
  • Aluminum Push/Pull Capable (optional purchases)

In stock

Bundle Package: Power I-MIG 275P & MIG Cart $2,350.00

Power I-MIG 275P Series CC/CV inverter: MIG/ MAG/ Stick Welder
Processes: GMAW / GMAW-P<br

Features & Benefits
  • Synergic GMAW/SMAW operation (MIG/Stick)
  • Single pulse MIG welding capability up to 250Hz
  • 50% duty cycle at 275A
  • Spot and stitch timers
  • Burn back control
  • Heavy duty cast aluminum feed mechanism with 4 roll driven feed
  • Euro quick connect 36 series MIG gun (Binzel/Trafimet compatible)
  • AK36 MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
  • Arc force control is useful for fine tuning arc characteristics in MIG and Stick
  • Dual digital display allows precise and repeatable setting of welding parameters
  • Holds a 12" roll of welding wire or with an adapter that is included is will use an 8" spool
  • Digitally controlled IGBT Inverter with programmable memory
  • Stick weld features E6010 capability
What's Included
  • AK36 North Series MIG Gun with 3m Cable and Euro Style Quick Connect ** Installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060")
  • Work clamp with 3m cable and 35 series DINSE style connector
  • Stick Electrode Holder with 3m Cable and 35 series DINSE style connector
  • Everlast Argon Regulator
  • Spool Adapter
  • 1.8m Power Input Cable with 6-50 NEMA Style Plug (240v)
Tech Specs
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, Stick
220/240 V 1 PHASE
Max Rated MIG Amps:
Max Rated Stick Amps:
MIG Amps/Volts @ Rated Duty Cycle:
  • 275A/30V @ 50% Duty Cycle/ 40º C
  • 250A/26.5V @ 60% Duty Cycle/ 40º C
  • 195A/25.6V @ 100% Duty Cycle/ 40º C
Stick Amps/Volts @ Rated Duty Cycle:
  • 200A/28V @ 50% Duty Cycle/40º C
  • 180A/27.2V @ 60% Duty Cycle/40º C
  • 140A/25.6V @ 100% Duty Cycle/40º C
Max Inrush ( I1MAX ) Amps:
Maximum Rated (I1EFF ) Input Amps:
MIG Output Range:
30-275A/ 15.5-30V
Stick Output Range:
Variable MIG Inductance/Stick Arc Force Control:
Spool Gun Capable:
Yes, Optional. (Not Included)
Pulse Frequency:
10-250 Hz
Pulse Time On:
Pulse Volts:
Standard Drive Roll wire size:
Separate wire feeder:
No, self contained
Number of Drive rollers:
Max Wire Feed Speed:
Max Wire Roll Diameter:
12” (full size up to 44lb)
Preflow time:
Post Flow Time:
Flux Core:
Yes, Optional
2T/4T /Torch latch/Trigger:
Other Features:
  • 9 Program Memory
  • E 6010 Stick
  • Spool gun and Push pull gun capability
  • Hot Start Time 0-2 Seconds
  • Hot Start Intensity 0-100%
  • MIG Inductance 0-100%
  • Synergic and Manual MIG modes
  • Extra Drive Rolls included .023"-.045" Hard Wire
  • Burn Back Control 0-2 Seconds
  • Spot Timer 0-15S
  • Stitch Timer 0-15S
Minimum Maxmimum
  • Weld up to a maximum of 5/8" in a single pass weld
  • Weld over 1" in multiple pass welds
  • Weld a minimum of 24 gauge
Optional Equipment
  • 5m Series 36 MIG gun with Euro quick connect
  • Liners
  • Spool Gun (Not Included)
  • Push Pull gun
  • Flux Core Drive Rolls
  • Aluminum Drive Rolls
  • Welding Cart
  • When used on a generator, use only with a generator rated for at least 12,500 surge watts and rated for 5% or less THD (Clean power).
  • Consult manufacturer of generator as to whether the power generated by the unit falls within the 5% or less THD.  Operation on undersized, or "dirty" powered generators will void the warranty.
  • This unit is manual single pulse only and is not synergic. This type of pulse is best suited for welding steel and stainless.  This unit does not feature a MIG hot start, which is most helpful for welding aluminum.
  • ** Supplied AK36 MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)