Bundle Package: PowerCyclone 312 & North Push Pull Gun – 6m

$3,650.00

  • New Cyclone Series!
  • Built In Cart
  • LCD Screen
  • Programmable Memory
  • PowerSet MIG Mode
  • Arc force control (inductance adjusts arc characteristics in both MIG and Stick
  • AK36 North MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
  • Capable of SMAW (stick) welding when MIG conditions are not ideal
  • Good duty cycle
  • Weld aluminum with optional MTS spool gun (Not Included)
  • Push Pull Capable (Included)
  • Heavy duty cast aluminum wire feed assembly
  • Flux core capable
  • Post-Flow Adjustable
  • Pre-Flow Adjustable
  • Adjustable Burn back control
  • Adjustable Hot Start

In stock (can be backordered)

Bundle Package: PowerCyclone 312 & North Push Pull Gun - 6m $3,650.00
Features & Benefits
  • New Cyclone Series!
  • Built In Cart
  • LCD Screen
  • Programmable Memory
  • PowerSet MIG Mode
  • Arc force control (inductance adjusts arc characteristics in both MIG and Stick
  • AK36 North MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
  • Capable of SMAW (stick) welding when MIG conditions are not ideal
  • Good duty cycle
  • Weld aluminum with optional MTS spool gun (Not Included)
  • Push Pull Ready (Included)
  • Heavy duty cast aluminum wire feed assembly
  • Flux core capable
  • Post-Flow Adjustable
  • Pre-Flow Adjustable
  • Adjustable Burn back control
  • Adjustable Hot Start
What's Included
  • 36 North Series MIG Gun with 3m Cable and Euro Style Quick Connect ** Installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060")
  • Work clamp with 3m cable and 35 series DINSE style connector
  • Stick Electrode Holder with 3m Cable and 35 series DINSE style connector
  • North Push Pull Gun - 6m
  • Everlast Argon Regulator
  • Tank Chain
  • 8" Spool Adapter
  • 1.8m Power Input Cable with 6-50 NEMA Style Plug (240v)
Tech Specs
Type:
LCD Screen
Output /Process Type:
MIG, Stick
Output /Process Type:
240 SINGLE PHASE
Max Rated MIG Amps:
  • @240V:  315A
Max Rated Stick Amps:
  • @ 240V:  250A
MIG Amps/Volts @ Rated Duty Cycle:
@240V
  • 315A/29.8V @ 35% Duty Cycle/40º C
  • 250A/26.5V @ 60% Duty Cycle/40º C
  • 200A/24V @ 100% Duty Cycle/40º C
Stick Amps/Volts @ Rated Duty Cycle:
240V:
  • 250A/30V @ 35% Duty Cycle/40º C
  • 200A/28V @ 60% Duty Cycle/40º C
  • 160A/26.4V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
  • @240V:  64A
Maximum Rated (I1EFF ) Input Amps:
  • @240V:  38A
OCV:
70V
MIG Output Range:
  • @ 240V:  30A-315A/15.5V-29.75V
Stick Output Range:
  • @240V:  10A-250A/20.4V-30V
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun / Push Pull Capable:
Yes, Optional. (MTS) (Not Included)
Pulse:
No
Standard Drive Roll wire size:
.035”-.045”
Separate wire feeder:
No, self contained
Number of Drive rollers:
4
Max Wire Feed Speed:
600 IPM
Max Wire Roll Diameter:
12” (up to 44lb)
Weight:
120
Memory:
Yes
Preflow time:
0-10S Adjustable
Post Flow Time:
0-10S Adjustable
Flux Core:
Yes, Optional
Air Carbon Arc:
No
2T/4T /Torch latch/Trigger:
No
Other Features:
  • Trafimet/Binzel compatable 36 series torch
  • Use 8" or 12" spools.
  • Memory
  • PowerSets
Minimum Maximum
  • Steel/Stainless: 24-22 Gauge to 1/2" Single Pass
  • Steel/Stainless up to 1 1/4" multi-pass or greater.
  • Aluminum: 18 Gauge to 3/8" Single Pass
  • Aluminum up to 1" or greater Multi-Pass or greate
  • Weld with a minimum of 1/16" diameter electrode 240V
  • Weld with a maximum of 1/8-5/32" diameter electrode 240V
This unit is not recommended for use with E6010.  Maximum electrode diameter is ultimately dependent upon rod type and electrode manufacturer recommendations.
Optional Equipment
  • Welding Cart
  • Consumable Kit
  • Liners
  • MTS Spool gun with 25 ft cable (Not Included)
Notes
  • This unit operates on 240V Single Phase only
  • For generator use, use only with a generator certified by the generator manufacturer as being "clean power", which is less than 5% THD. F
  • Supplied AK36 MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
  • This unit is not recommended for use wtih E6010