Power I-MIG 353Dpi – Contact Sales to Purchase

$4,000.00

  • Synergic GMAW-P/SMAW Operation (MIG/Stick)
  • Separate Wire Feeder / Power Source with 15 ft. cable
  • Water-Cooler Included
  • Cart Included
  • Single Pulse and Double Pulse MIG, fully synergic with synergic and non-synergic basic MIG mode (non-pulse)
  • Industrial duty cycle of 60% at 350A
  • Burn back control
  • Heavy Duty Cast aluminum feed mechanism with true 4 roll driven feeding on separate, portable wire feeder
  • Euro Quick connect series MIG gun or Water Cooled Equivalent
  • Arc force and Inductance control useful for fine tuning arc characteristics in Stick and MIG modes
  • Dual Digital Display allows precise and repeatable setting of welding parameters
  • Save up to 9 favorite programs
  • Uses a 12" (30-44 lbs) roll of welding wire, or can use an 8" (10-12 lbs) with available adapter
  • Digitally Controlled IGBT Inverter with programmable memory
  • Stick weld function
  • Spool Gun and Push/Pull Gun capable (not included)

Out of stock

The Power i-MIG 353DPi features the latest in inverter based, pulse MIG technology.  This welder is ideal for welding aluminum and bronze brazing activities in the automotive industry.  It features two types of synergic pulse: Single and Double. The Single Pulse is perfect for control heat and wet in and burn through of heat sensitive metals where HAZ issues are a concern, such as the auto-body businesses where new alloys require special welding and brazing processes to repair frames and panels safely and reliably.  With Single pulse, increased production speed welds are possible without over-melting or the metal, allowing for out of position welding of aluminum.  Double pulse features a “stair-stacked” pulse which features the ability to stack the single pulse into two basic layers, which helps to form a “stack of dimes” TIG look in the weld.  This is ideal for welds where appearance and strength count equally and is required for best possible appearance without resorting to TIG. The unit can also be used in a synergic MIG mode without pulse and a basic non-pulse, non synergic mode as well, where full control over all parameters are possible manually.  To prevent crater cracking and cold starts the unit has several features which include slope up, hot start, down slope.  Pre and post flow are standard features as well, which help prevent porosity at the beginning and end of welds where it is common to develop weld flaws.  If you find a program you like in a manual setup mode, you can easily save it with the capacity to store 9 major programs.  The unit is programmed with a possible 40 different, well designed and tested synergic programs for standard and pulse MIG operation.   Companies and individuals who are looking for the consumate professional MIG machine will appreciate the ability  to fine tune the arc even while in synergic mode, a  hallmark characteristic of all Everlast synergic capable MIGs.  The Power i-MIG 353DPi brings the price significantly down from competitor models, making this one of the affordable and capable pulse MIG welders on the market.  There’s no longer any need for a company or individual to spend $10,000 or more on a special welding machine to repair modern alloys. The machine can be used to weld aluminum, bronze, steel, or stainless.  The 60% duty cycle at 350 Amps proves this unit is a serious heavy-weight contender.  If you really want to compare to other units in this class, check out other manufacturer’s duty cycle at maximum output.  Some can only operate at maximum output for 10 seconds.  Others are only at 10% at maximum output.  Now when you consider that this is a measure constant welding that you can perform 10 minute period of time(as is the standard used in the USA and Canada).  Imagine having to sit idle for 9 minutes and 50 seconds after completing a 10 second weld before you start your next 10 second weld! 

Features & Benefits
  • Synergic GMAW-P/SMAW Operation (MIG/Stick)
  • Separate Wire Feeder / Power Source with 15 ft. cable
  • Water-Cooler Included
  • Cart Included
  • Single Pulse and Double Pulse MIG, fully synergic with synergic and non-synergic basic MIG mode (non-pulse)
  • Industrial duty cycle of 60% at 350A
  • Burn back control
  • Heavy Duty Cast aluminum feed mechanism with true 4 roll driven feeding on separate, portable wire feeder
  • Euro Quick connect series MIG gun or Water Cooled Equivalent
  • Arc force and Inductance control useful for fine tuning arc characteristics in Stick and MIG modes
  • Dual Digital Display allows precise and repeatable setting of welding parameters
  • Save up to 9 favorite programs
  • Uses a 12" (30-44 lbs) roll of welding wire, or can use an 8" (10-12 lbs) with available adapter
  • Digitally Controlled IGBT Inverter with programmable memory
  • Stick weld function
  • Spool Gun and Push/Pull Gun capable (not included)
What's Included
  • AK500 Water-Cooled MIG Gun with Euro quick-connect 15 ft. (5m)
  • Ground Clamp with 10 ft. cable and 35 DINSE connector
  • Stick Electrode Holder with 10 ft. and 35 DINSE connector
  • Seperate Wire Feeder
  • WC400 Water Cooler
  • Ar/CO2 Regulator
  • No Power Plug
Tech Specs
Type:
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, Stick
Voltage/phase:
220/240 V 1 PHASE, 480 V 3 Phase
Max Rated MIG Amps:
350A
Max Rated Stick Amps:
350A
MIG Amps/Volts @ Rated Duty Cycle:
  • 350A/31.1V @ 60% Duty Cycle/ 40º C
  • 280A/28V @ 100% Duty Cycle/ 40º C
Stick Amps/Volts @ Rated Duty Cycle:
  • 350A/34V @ 60% Duty Cycle/40º C
  • 280A/31.2V @ 100% Duty Cycle/40º C
 Max Inrush ( I1MAX ) Amps:
240V 1 phase: 62.5A
480V 3 phase: 21.6A
Maximum Rated (I1EFF ) Input Amps:
240V 1 phase: 49A
480V 3 phase: 18A
OCV:
70V
MIG Output Range:
50-350A/ 16.5-31.5V
Stick Output Range:
10-350A/20.4-34V
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes, Optional (Not Included)
Pulse:
Double/Pulse on Pulse
Pulse Frequency:
10-250 Hz Single Pulse Mode, 0-9.9 Hz Double Pulse
Pulse Time On:
Synergically controlled
Pulse Volts:
Synergically controlled with Voltage offset
Standard Drive Roll wire size:
 .040" and greater
Separate wire feeder:
Yes
Number of Drive rollers:
4
Max Wire Feed Speed:
600IPM
Max Wire Roll Diameter:
12" (full size up to 44lb)
Memory:
Yes
Preflow time:
 0-10S
Post Flow Time:
0-10S
Flux Core:
Yes, Optional
2T/4T /Torch latch/Trigger:
Yes
Other Features:
  • 9 Program Memory
  • E 6010 Stick
  • Spool gun and Push pull gun capability
  • Hot Start Time 0-2 Seconds
  • Hot Start Intensity 0-100%
  • MIG Inductance 0-100%
  • Synergic and Manual basic MIG modes
  • Synergic Single Pulse and Double Pulse MIG modes
  • Burn Back Control 0-2 Seconds
  • Synergic Pulse
  • Water Cooler
  • Cart
Minimum Maximum
MIG:
  • Weld up to a maximum of 1/2" in a single pass weld Steel/Stainless
  • Weld over 3/4" in multiple pass welds Steel/Stainless
  • Weld a minimum of 27 gauge Steel/Stainless (Pulse mode)
For MIG welding Aluminum, you can purchase a MIG Gun, U-groove drive rolls and the Teflon liner (best choice for shorter distances). For longer required distances, choose between the Parker 300A Spool Gun or  Push-Pull Gun (Recommended for longer distances)  For Brazing, follow same recommendations for gun selection
  • Weld up to a maximum of 3/8" in a single pass weld Aluminum
  • Weld over 3/4" in multiple pass welds Aluminum
  • Weld a minimum of 22 Gauge Aluminum (Pulse mode)
For Brazing with MIG:
  • Braze down to a minimum of .025"
  • Upper practical limit is 3/16"-1/4" for the Brazing Application
Stick:
  • Weld up to a maximum of 5/32" diameter electrode
  • Weld with a minimum of 1/16" diameter electrode
Optional Equipment
  • Spool Gun
  • Liners
  • Push Pull gun
  • Flux Core drive rolls
  • Aluminum U groove drive Rolls
Notes
  • Shipping Rates vary $200 to $500
  • This item is shipped on a skid and can ONLY be shipped to a Day & Ross Freight Centre nearby
  • Please contact shipping department for quote/purchase
If running on a generator, make sure the generator is rated by the generator manufacturer as providing "clean power", which is 5% or less THD (Total Harmonic Distortion).  Failure to do so may result in failure of the unit.  Use with any generator not labeled as clean power wil void the warranty on the affected parts. Use with a minimum of 15,500 (Surge) Watt generator.  Do not use long or underated extension cords with this unit.
  • This unit is not designed to weld with E6010 welding rods.