PowerPlasma 62i w/ CNC Package


  • New Bezel and stackable feature!
  • 60 Amps of professional cutting power
  • Rugged IGBT construction
  • Blow-back start technology
  • Pilot Arc
  • CNC port for use with plasma tables for cuts up to 3/8"
  • PT/iPT 60 CNC Torch (8m)

In stock

PowerPlasma 62i w/ CNC Package $1,700.00

The PowerPlasma 62i is now available in a CNC only package.  This unit comes with all the basics to get started with your Plasma table, including a CNC port, and CNC torch.  It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop operating a small plasma table.  The PowerPlasma 62i is built on an inverter platform, making use of IGBT technology to reduce weight, and improve reliability and performance. The unit has plenty of cut capacity with a recommended 3/8″ regular cuts, maximum clean cut capability is up to 3/4″ (at reduced speeds).  Pierce up to 5/16″ for production cutting. The new iPT 60 CNC torch is a part of our package and features a proven long life with blow back start, pilot arc and a variety of consumable choices.  The PowerPlasma 62i features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.

Features & Benefits
  • New Bezel and stackable feature!
  • Comes with CNC torch (Hand torch not included)
  • Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
  • Cuts virtually any type of metal with ease
  • Simple to use torches with inexpensive service parts and consumables
  • Commercial class, 60% Duty cycle at 60 amps for CNC use
  • Clean, smooth cuts with the genuine iPT 60 CNC torch
  • Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
  • Pilot arc improves performance and cutting on dirty, painted, or rusted metals
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
  • Digital readout for air pressure, allows quick verification of air pressure
  • Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
  • Adjustable postflow timer for maximum consumable life
  • IGBT components improve reliability and performance while reducing overall weight
  • CNC socket for CNC use on plasma tables with included machine torch
  • NOTE: When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD)
What's Included
  • iPT60 CNC Machine Torch - 8m with Euro quick-connect central adapter
  • Work clamp with 3m cable and 25 series DINSE style connector
  • Regulator/Water trap (this is not an air dryer)
  • Consumable Starter Kit
  • 1.8m Power input cable with NEMA 6-50 Plug
Tech Specs
220/240 V 1 Phase
Output Amp/Volt Range:
20-60A; 88-104V
Max Inrush ( I1MAX ) Amps:
Maximum Rated (I1EFF ) Input Amps:
Duty Cycle At Rated Amps/Volts:
  • 60% @ 60A/104V
  • 100% @ 50A/100V
Arc Start Type:
Blow Back (Piston type)
Torch Type:
CNC Interface Port:
Adjustable Post Flow Timer:
Light to Medium | Requires Gouging Consumables (Not Recommended)
Recommended Cutting Air Pressure:
75 psi
Recommended Compressor Capacity:
6CFM @ 90 psi/ 30 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Minimum Maximum
  • Up to 9/16" daily use @ 15-20 ipm
  • Up to 3/4" clean cut @ 8-12 ipm
  • Up to 1" severance cut @ 3-5 ipm
  • Max Pierce CNC Up to 3/8"
Plasma cutting quality + capacity is affected by several factors.
Optional Equipment
  • iPT 60 Machine Torch
  • Welding cart
  • Welder Cover
  • Consumable kit