PowerPlasma 82i w/ CNC Package


  • New Bezel and stackable feature!
  • 80 Amps of professional cutting power
  • Rugged IGBT construction
  • Blow-back start technology
  • Pilot Arc
  • CNC port
  • 8m iPT 80 CNC Torch

In stock

PowerPlasma 82i w/ CNC Package $1,950.00

The PowerPlasma 82i is now available in a CNC only package. The portability, power, and performance, combine with the price to make the PowerPlasma 82i  one of the best choices available in it’s class.  On power alone, the unit shines.  The severance capacity for the 80 amp IGBT inverter plasma cutter is rated up to 1 1/4″ with a clean cut rating. For routine daily use, the unit is recommended for cutting 1″ thick plate metal.  Considering price, the unit is in a class all by itself, with a price tag of only $1950.00    On portability, the units size is compact and can be easily picked up and carried right to where the work needs to be done.  The iPT 80i torch is rugged and features improved consumable life.  This blowback design torch comes with a variety of consumable choices, shielded and unshielded.   There’s not much in most shops that this plasma cutter isn’t capable of handling.  True it has a professional feel, capability and performance, but it also offers something for the hobbyist, with standard 240V operating input, which makes it right at home in any well equipped home shop or garage.

Features & Benefits
  • New Bezel and stackable feature!
  • Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
  • Cuts virtually any type of metal with ease
  • Simple to use torches with inexpensive service parts and consumables
  • Commercial/Industrial class, 60% Duty cycle at 80 amps
  • Clean, smooth cuts and improved consumable life with the new iPT 80 CNC torch
  • Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
  • Pilot arc improves performance and cutting on dirty, painted, or rusted metals
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
  • Adjustable post flow control up to 50 seconds to improve consumable and torch life
  • Digital readout for air pressure, allows quick verification of air pressure
  • Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
  • IGBT modules improve reliability and performance while reducing overall weight
  • CNC socket and CNC torch for plasma table use.
What's Included
  • iPT80 CNC Machine Torch - 8m with Euro quick-connect central adapter
  • Work clamp with 3m cable and 25 series DINSE style connector
  • Regulator/Water trap (this is not an air dryer)
  • Consumable Starter Kit
  • 1.8m Power input cable with NEMA 6-50 Plug
Tech Specs  
220/240 V 1 Phase
Output Amp/Volt Range:
Max Inrush ( I1MAX ) Amps:
  • @220V:  70A
  • @230V: 67A
  • @240V: 64A
Maximum Rated (I1EFF ) Input Amps:
  • @220V: 58A
  • @230V: 54A
  • @240V: 53A
Duty Cycle At Rated Amps/Volts:
  • 60% @ 80A/112V
  • 100% @ 63A/105V
Arc Start Type:
Blow Back (Piston type)
Torch Type:
Italian designed iPT 80i torch
CNC Interface Port:
Adjustable Post Flow Timer:
Light to Medium | Requires Gouging Consumables (Not Recommended)
Recommended Cutting Air Pressure:
Recommended Compressor Capacity:
7CFM @ 90 psi/60 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Amps/Volts @ 60% Duty Cycle:
80A/ 112V
Minimum Maxmimum
  • Up to 1" daily use @ 15-20 ipm
  • Up to 1 1/4" clean cut @ 8-12 ipm
  • Up to 1 7/16" severance cut @ 3-5 ipm
  • Max Pierce CNC up to 5/8"
Plasma cutting quality + capacity is affected by several factors.
Optional Equipment
  • iPT 80 machine torch
  • Welding cart
  • Welder Cover
  • Consumable kit
  • A separate inline air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture.
  • If using with a generator, use a generator rated by its manufacturer as providing "clean power".  This is usually 5% or less THD (total harmonic distortion).
  • Use with a generator rated for at least a minimum of 15,000 surge watts.
  • This unit does not include a hand torch.