PowerPlasma 82i

$1,450.00

  • New Bezel and stackable feature!
  • 80 Amps of professional cutting power
  • Rugged IGBT construction
  • Blow-back start technology
  • Pilot Arc
  • CNC Port
  • 4m iPT 80 torch

In stock

PowerPlasma 82i $1,450.00

If you are looking for a professional level machine that you won’t out grow as your business expands, the Everlast PowerPlasma 82i is likely the one that you’d choose.  The portability, power, and performance, combine with the price to make the PowerPlasma 82i  one of the best choices available in it’s class.  On power alone, the unit shines.  The severance capacity for the 80 amp IGBT inverter plasma cutter is rated up to 1 1/4″ with a clean cut rating. For routine daily use, the unit is recommended for cutting 1″ thick plate metal.  Considering price, the unit is in a class all by itself, with a price tag of only $1450.00    On portability, the units size is compact and can be easily picked up and carried right to where the work needs to be done.  The iPT 80i torch is rugged and features improved consumable life.  This blowback design torch comes with a variety of consumable choices, shielded and unshielded.   There’s not much in most shops that this plasma cutter isn’t capable of handling.  True it has a professional feel, capability and performance, but it also offers something for the hobbyist, with standard 240V operating input, which makes it right at home in any well equipped home shop or garage.

Features & Benefits
  • New Bezel and stackable feature!
  • IGBT Inverter Plasma Cutter
  • Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
  • Cuts virtually any type of metal with ease
  • Commercial class, 60% Duty cycle at 80 amps
  • iPT 80 torch (4m)
  • Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
  • Pilot arc improves performance and cutting on dirty, painted, or rusted metals
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation
  • Adjustable post flow control up to 60 seconds to improve consumable and torch life
  • Digital readout for air pressure, allows quick verification of air pressure
  • Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
  • CNC socket for CNC use on plasma tables for cuts up to 7/16" (machine torch optional)
What's Included
  • iPT80 Hand Held Torch - 4m with Euro quick-connect central adapter
  • Work clamp with 3m cable and 25 series DINSE style connector
  • Regulator/Water trap (this is not an air dryer)
  • Consumable Starter Kit
  • 1.8m Power input cable with NEMA 6-50 Plug
 
Tech Specs
Type:
IGBT
Voltage/phase:
220/240 V 1 Phase
Output Amp/Volt Range:
20-80A/88V-112V
OCV:
230
Max Inrush ( I1MAX ) Amps:
  • @220V:  70A
  • @230V: 67A
  • @240V: 64A
Maximum Rated (I1EFF ) Input Amps:
  • @220V: 58A
  • @230V: 54A
  • @240V: 53A
Duty Cycle At Rated Amps/Volts:
  • 60% @ 80A/112V
  • 100% @ 63A/105V
Arc Start Type:
Blow Back (Piston type)
Pilot Arc:
Yes
Torch Type:
iPT60 Torch
CNC Interface Port:
Yes  
Adjustable Post Flow Timer:
Yes
Gouging:
Light to Medium | Requires Gouging Consumables (Not Recommended)
Recommended Cutting Air Pressure:
65-75psi
Recommended Compressor Capacity:
7CFM @ 90 psi/60 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Yes
Amps/Volts @ 60% Duty Cycle:
80A/ 112V
Minimum Maximum
  • Up to 1" daily use @ 15-20 ipm
  • Up to 1 1/4" clean cut @ 8-12 ipm
  • Up to 1 7/16" severance cut @ 3-5 ipm
  • Max Pierce CNC up to 5/8"
Plasma cutting quality + capacity is affected by several factors.
Optional Equipment
  • Welding cart
  • Welder Cover
  • Consumable kit
Notes