The Everlast PowerARC 140STi is our small portable IGBT inverter welder that features both Stick and DC Live Lift TIG capability. It comes with its own carrying case and includes the Stick holder with the cable and DINSE style connector, a gas valve TIG torch with cable and DINSE connector and the work clamp. The arc quality on the PowerArc 140STi is on the level of much larger, commercial class machines. The welder features both adjustable hot start and arc force control in Stick mode that improves weld-ability with hard to start welding electrodes and in situations where rod sticking can be a problem. With TIG and Stick functions, at 220v this unit can operate from 10 to 140 amps. At 110v, it will operate from 10-80 amps. The PowerARC 140STi is 120V/240V dual-voltage, which means the unit will weld virtually anywhere there is a clean power source available. NOTE: An argon regulator is not included so if you plan on TIG welding you will need to purchase one (go to the ACCESSORIES TAB and click on TIG TORCHES AND ACCESSORIES).
PowerARC 140STI
$425.00
- Dependable IGBT inverter
- New heavy duty internal design
- Commercial 35% Duty Cycle at 140A
- DC Stick/DC Live Lift TIG functions
- 120V/240V Dual Voltage
- Adjustable Hot Start
- Adjustable Arc Force control
- Plastic carry case
In stock
| Features & Benefits |
|
|---|---|
| What's Included |
|
| Tech Specs |
IGBT Type:
Individual IGBT
Inverter Type:
Analog
Output Type:
DC Stick, DC TIG
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps:
Max Rated Stick Amps:
TIG Amps @ Rated Duty Cycle:
120V:
Stick Amps @ Rated Duty Cycle:
120V:
Max Inrush ( I1MAX ) Amps:
110V: 28.1A
220V: 24.2A
Maximum Rated (I1EFF ) Input Amps:
110V: 17.0 A
220V: 15.0A
OCV:
70V
TIG Output Range DC:
Stick Ouput Range DC:
Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Adjustable Hot Start
6010/Cellulose Capable:
NO
Minimum Amp DC TIG Start:
10A
TIG Start Type:
Live Lift Start
Foot Pedal:
None/Not Applicable
|
| Minimum Maximum |
|
| Optional Equipment |
|
| Notes | This unit needs a minimum 5500 watts (120V) to operate properly. Use with generators certified as clean power by the generator manufacturer (10% total harmonic distortion). Damage cause by operating on generators that are not the proper size and type are not warrantied. Not recommended for welding with E 6010.TIG is DC output only.This machine is NOT CAPABLE of AC Aluminum TIG |
Related products
-
- Dependable IGBT inverter
- Commercial 35% Duty Cycle at 200 Amps
- Soft button for E6010 (Short Arc)
- DC Stick/Live Lift TIG functions
- 120V/240V Dual Voltage
- Adjustable hot start
- Adjustable Arc Force control
-
- Dependable IGBT inverter
- Heavy duty internal design
- Digital face, easy to program
- Commercial 35% Duty Cycle at 200 Amps
- E6010/cellulose compatible with touch of a button (Short Arc)
- DC Live Lift for TIG operation
- 120V/240V Dual Voltage
- Fully adjustable hot start
- Fully adjustable Arc Force control
- Downslope and post-flow control
-
- Dependable IGBT inverter
- Commercial 35% Duty Cycle at 160A
- DC Stick/TIG functions
- High Frequency, Lift TIG and Live TIG start
- Foot Pedal included
- 120V/240V Dual Voltage
- Adjustable Hot Start
- Adjustable Arc Force control
- Plastic carry case
- DC ONLY.
-
- New Bezel and stackable feature!
- Dependable IGBT inverter
- Single Phase/Three Phase, 220V only
- DC Stick/TIG functions
- High Frequency and Lift TIG start
- Foot Pedal included
- VRD function
- Adjustable hot start and arc force controls
- 2T/4T TIG controls
- Built in gas solenoid
