For more than a decade, Everlast has been at the forefront of pioneering the advancement of reliable and cost-effective inverter MIG welders. The legendary success of the original i-MIG inverter series is well-known. The introduction of the inverter-based Cyclone140E caused a stir in the industry, leaving others scrambling to catch up. While competitors were attempting to fit outdated transformer technology into smaller frames to compete in the lightweight 120V, 140A MIG class, Everlast was already working on a new second generation. With the launch of the new “Economy” class of welders, Everlast once again leads the industry. The Cyclone 140E is a highly advanced 120V inverter MIG unit that is both affordable and top-of-the-line. The addition of the PowerSet mode makes setup easy for beginners and professionals alike. The unit also features a user-friendly LCD screen for precise control over voltage and wire feed speed. The sleek design ensures portability, allowing customers to take the unit wherever it is needed. With an impressive duty cycle and unmatched power, the Cyclone 140E outperforms competing transformer models on the market.
PowerCyclone 262
$1,800.00
PowerCyclone 212
PowerCyclone 140E
$590.00
- Equipped with LCD Display
- Complete update for ease of use.
- Special Features include: PowerSet Mode- Selection of Gas Type, Wire Diameter, Thickness/Thinness of Material.
- AK15 North MIG Gun installed with a Blue STEEL Liner for wire/tip sizes 0.6/0.8mm (.023/0.030") (subject to change)
- Handle included *not pictured*
- Stepless control of both the wire speed and voltage
- Durable IGBT components offer longer life
- Stable smooth arc with good wet in characteristics
- 120V input design allows the unit to be used almost anywhere you have access to a 30amp outlet
- Sturdy drive mechanism
- Standard drive rolls can feed .023" - .030" ( .06 mm-.08 mm) wire
- Designed to be used with 4" and 8" wire spools
In stock
| Features & Benefits |
|
|---|---|
| What's Included |
|
| Tech Specs |
Type:
LCD IGBT Inverter
Output /Process Type:
MIG
Voltage/phase:
120V
Max Rated MIG Amps:
140A
MIG Amps/Volts @ Rated Duty Cycle:
Max Inrush ( I1MAX ) Amps:
38.6A
Maximum Rated (I1EFF ) Input Amps:
19.5A
OCV:
60V
MIG Output Range:
25A-140A/15.3V-21V
Variable MIG Inductance/Stick Arc Force Control:
No
Spool Gun Capable:
Yes, Optional. (Not Included)
Standard Drive Roll wire size:
.023"-.030"
Separate wire feeder:
No, self contained
Number of Drive rollers:
2
Max Wire Roll Diameter:
8" (up to 12 lb)
Weight: 28 lb
Memory:
No
Preflow time:
Fixed
Post Flow Time:
Fixed
Flux Core:
Yes, Optional
Other Features:
Binzel/Trafimet 15 series Gun (appearance may vary from depicted)
|
| Minimum Maximum |
|
| Optional Equipment |
|
| Notes |
|
Related products
-
- Synergic GMAW-P/SMAW Operation (MIG/Stick)
- Separate Wire Feeder / Power Source with 15 ft. cable
- Water-Cooler Included
- Cart Included
- Single Pulse and Double Pulse MIG, fully synergic with synergic and non-synergic basic MIG mode (non-pulse)
- Industrial duty cycle of 60% at 350A
- Burn back control
- Heavy Duty Cast aluminum feed mechanism with true 4 roll driven feeding on separate, portable wire feeder
- Euro Quick connect series MIG gun or Water Cooled Equivalent
- Arc force and Inductance control useful for fine tuning arc characteristics in Stick and MIG modes
- Dual Digital Display allows precise and repeatable setting of welding parameters
- Save up to 9 favorite programs
- Uses a 12" (30-44 lbs) roll of welding wire, or can use an 8" (10-12 lbs) with available adapter
- Digitally Controlled IGBT Inverter with programmable memory
- Stick weld function
- Spool Gun and Push/Pull Gun capable (not included)
-
- Digitally Controlled IGBT Inverter
- MIG/Stick function -Standard, Synergic, Single Pulse, Double Pulse MIG -Stick Function
- Spool Gun and Push-Pull Ready (Not Included)
- 250A MIG/250A Stick maximum output
- 60% Duty Cycle at 250A MIG/250A Stick
- .030"-.045" standard wire capability for Synergic mode
- Adjustable inductance/arc force
- Volt, Amp and Memory displays
- Use 8" or 12" spools
- Euro-Quick Connect for the 36 series MIG gun
- AK36 North MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
- Aluminum Push/Pull capable
-
- New Cyclone Series!
- PowerSet MIG Mode
- LCD Screen
- Multi-Process: MIG and Stick
- Spool Gun ready MTS Connection (Not Included)
- 35% Duty Cycle at 200A
- Adjustable Arc force and Burn Back Control
- Up to a 8" spool (12 lbs)
- Spot Timer
- Polarity Reminder
- Pre and Post Flow Control
- Adjustable Burn back control
- 600 IPM Wire feed speed 240V
- 400 IPM Wire feed speed 120V
- Euro-Quick Connect 15 series gun
- AK24 North MIG Gun installed with a Red STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/0.045") (subject to change)
- 120V/240V Dual voltage
- Preflow and Post flow
-
- Equipped with LCD Display
- Complete update for ease of use.
- Special Features include: PowerSet Mode- Selection of Gas Type, Wire Diameter, Thickness/Thinness of Material
- AK15 North MIG Gun installed with a Blue STEEL Liner for wire/tip sizes 0.6/0.8mm (.023/0.030") (subject to change)
- Spool Gun ready. (Not Included)
- Stick with optional electrode holder
- 100% Duty Cycle at 60A @120V, 90A@240V
- Up to a 8" spool (12 lbs)
- Euro-Quick Connect 15 series gun
- 120V/240V Dual voltage
- Fixed Preflow and Post flow
