Add to cart

PowerPro 205Si

$2,025.00

New Bezel and stackable feature!
Digitally Controlled IGBT Inverter
Analog style controls for easy setup
Ideal for portable repair, shop, or farm use
200A TIG/ 160A Stick/ 50A Plasma
Weld and cut in one package
60% Duty Cycle at max TIG Amps
AC/DC output to weld any metal
Fully adjustable pulse .5-250Hz
Cut up to 3/4"

Download Product Manual

In stock

Add to wishlist

Description
More Information

Looking for a good all around welder with some extra features? The PowerPRO 205Si from Everlast is designed to be just that unit. With 200 amp TIG, 160 amp Stick and 50 amp Plasma cutter capabilities, the digitally controlled IGBT Inverter welder/cutter is an all-in-one solution that is useful in many situations where space and portability are key concerns. The flexibility and versatility that the multi-process PowerPro 205S offers is hard to beat. Stable arc performance helps both hobbyists and professionals to make quality repairs in the field or in the fab shop. The TIG pulse capability further extends the unit’s capabilites, as well as the fully adjustable AC Frequency and AC balance which improves aluminum welding capabilities. The PowerPRO 205Si multi-unit is definitely the utility player in Everlast’s lineup and is ready to go to work anywhere it is needed.

Features & Benefits	New Bezel and stackable feature! All-in-one portability Compact IGBT Inverter design and low power consumption is ideal for portable use Compact yet powerful TIG welding/Plasma cutting features Easy to use controls with simple selector switch for process changeover With a quick change over of accessories and lines, simply select Plasma Mode to get started Good duty cycle ratings for TIG, Stick, and Plasma Duty Cycle indicator warns when thermal threshold has been exceeded and interrupts welding/cutting output until condition is resolved Over Current indicator warns when duty cycle has been exceeded and interrupts welding/cutting output until condition is resolved OK to cut indicator lights up when air pressure meets minimum required operating pressure and interrupts cutting output when air pressure is too low Low dross cuts on steel up to 5/8" with up to 7/8" maximum capacity (under ideal conditions) Exceptional arc stability for TIG/Stick functions
What's Included	4m Everlast #26 Series (air cooled) TIG torch with 35 series DINSE style connectors and torch switch for 2T/4T operation 4m iPT60 Hand Held Plasma Torch with 35 series DINSE style connectors Stick electrode holder with 3m cable and 35 series DINSE style connectors Work clamp with 2m cable and 35 series DINSE style connectors NOVA Foot Pedal Everlast Argon Regulator Air pressure regulator for plasma with built in water trap (This is not an air dryer) Basic TIG and Plasma Consumable Starter Kit (Tungsten not included for TIG) 1.8m Power input cable with NEMA 6-50 Plug
Tech Specs	IGBT Inverter Type: IGBT Voltage/phase: 220/240 V 1 Phase TIG output type: AC/DC TIG Start Type: High Frequency Only Pulse: Yes, Adjustable Plasma Cutter Arc Start Type: Blow Back (Piston type) PilotArc: Yes OK-to-Cut Indicator/Low Air pressure safety: Yes AC Frequency: 20-250Hz AC Balance (cleaning): 10-90% OCV: 85V TIG/Stick, 250V Plasma Max Inrush ( I1MAX ) Amps: 30A Maximum Rated (I1EFF ) Input Amps: 24A TIG Output Amps/Volts @ Rated Duty Cycle: 200A/18V @ 60% Duty Cycle 160A/16.4V @ 100% Duty Cycle Stick Output Amps/Volts @ Rated Duty Cycle: 160A/26.4V @ 35% Duty Cycle 130A/25.2V @ 60% Duty Cycle 100A/ 24V @ 100% Duty Cycle Plasma Output Amps/Volts @ Rated Duty Cycle: 50A/100V @ 35% Duty Cycle 40A/96V @ 60% Duty Cycle 30A/92V @ 100% Duty Cycle TIG AC Amp/Volt Range: 20A-200A; 10.8V-18V TIG DC Amp/Volt Range: 5A-200A; 10.2V-18V Stick Amp/Volt Range: 5A-160A; 20.2V-26.4V Plasma Amp/Volt Range: 20A-50A; 88V-100V Start Amps: DC: 5A-200A AC: 20A-200A End Amps: DC: 5A-200A AC: 20-200A Down Slope Time: 0-25 Seconds Up Slope Time: 0-10 Seconds Preflow time: 0-10 Seconds Post Flow Time: 0-25 Seconds OverCurrent Protection: Yes Duty Cycle Protection: Yes Air Pressure OK Safety Indicator: Yes TIG Pulse Frequency: .5-250 Hz TIG Pulse Time On: 10-90% TIG Pulse Amp Range: 5-95% Stick Arc Force Control: Yes, 10-100% 6010/Cellulose Capablel: No. Torch Type: PT/iPT 60 Recommended Cutting Air Pressure: 75 PSI Recommended Compressor Capacity: 5.0 CFH @ 90 PSI/ 25 Gallon
Minimum Maximum	36 ga. - 3/8" Aluminum: 24 ga. - 1/4" 1/16"-1/8" up to 1/2" daily use @ 15-20 ipm up to 5/8" clean cut @ 8-12 ipm up to 3/4" severance cut *Quality and capacity of cut depends upon consumable orifice size, standoff height, travel speed, etc.
Optional Equipment	Everlast air-cooled Series WP9 flex neck TIG torch for delicate, lower amp work Everlast water-cooled Series WP20 flex neck TIG torch for higher amperage work Everlast rotating head torches air or water cooled, various sizes Gas Lens TIG Kits, various options Water-cooler for watercooled torches Welding cart Welder Cover
Notes

PowerPro 205Si

Related products