PowerTIG 200DV

$1,750.00

Features & Benefits: 
    • New Bezel and stackable feature!
    • HV Start
    • Reliable IGBTs for stable inverter performance
    • 120V/240V Dual Voltage input
    • Low as 5 Amp start for TIG in DC/ 20 Amp in AC.
    • Pre flow and Post flow control for maximum shielding gas protection before and after
    • Color coded controls are easy to identify and understand
    • Lift start function for use when HF is not desirable
    • AC cleaning range adjustment of 30-70% offers good control over cleaning/penetration ratio
    • 240V Outlet in rear for optional WC375 water cooler
    • Pulse frequency ranges from .5-150 Hz in AC and DC mode
    • Arc force control (DIG) for stick helps to reduce spatter and improve arc performance
    • Upgraded NOVA foot pedal

In stock

PowerTIG 200DV $1,750.00

The PowerTIG 200DV expands versatility by adding dual voltage and a digitally controlled IGBT inverter.  The PowerTIG 200DV is able to operate on 120V or 240V single phase 50/60Hz. This unit is one of our most popular, comes with torch and upgraded pedal and is HF capable . 

Features & Benefits
  • New Bezel and stackable feature!
  • HV Start
  • Reliable IGBTs for stable inverter performance
  • 120V/240V Dual Voltage input
  • Low as 5 Amp start for TIG in DC/ 20 Amp in AC.
  • Pre flow and Post flow control for maximum shielding gas protection before and after
  • Color coded controls are easy to identify and understand
  • Lift start function for use when HF is not desirable
  • AC cleaning range adjustment of 30-70% offers good control over cleaning/penetration ratio
  • 240V Outlet in rear for optional WC375 water cooler
  • Pulse frequency ranges from .5-150 Hz in AC and DC mode
  • Arc force control (DIG) for stick helps to reduce spatter and improve arc performance
  • Upgraded NOVA foot pedal
What's Included
  • 4m Everlast #26 Series (air cooled) TIG torch with 35 series DINSE style connectors and torch switch for 2T/4T operation
  • Stick electrode holder with 3.5m cable and 35 series DINSE style connectors
  • Work clamp with 3.5m cable and 35 series DINSE style connectors
  • NOVA Foot Pedal
  • Everlast Argon Regulator
  • 240/120V Pigtail Adapter
  • Basic Consumable Starter Kit (Tungsten not included)
  • 1.8m Power input cable with NEMA 6-50 Plug
Tech Specs
IGBT Type:
Individual IGBT
Inverter Type:
Digital/Micro-controlled
Output Type:
AC/DC TIG
DC Stick
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps:
  • 120V: 125 Amps
  • 240V: 200 Amps
Max Rated Stick Amps:
  • 120V: 100A
  • 240V: 160A
TIG Amps @ Rated Duty Cycle:
120V:
  • 125A/15V @ 60% Duty Cycle/ 40º C
  • 100A/14V @ 100% Duty Cycle/ 40º C
240V:
  • 200A/18V @ 60% Duty Cycle/ 40º C
  • 160A/16.4V @ 100% Duty Cycle/ 40º C
 
Stick Amps @ Rated Duty Cycle:
120V:
  • 100A/24V @ 35% Duty Cycle/ 40º C
  • 80A/23.2V @ 60% Duty Cycle/ 40º C
  • 60A/ 22.4V @ 100% Duty Cycle/ 40º C
240V:
  • 160A/26.4V @ 35% Duty Cycle/ 40º C
  • 130A/25.2V @ 60% Duty Cycle/ 40º C
  • 100A/24V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
  • 120V: 35A
  • 240V: 31A
Maximum Rated (I1EFF ) Input Amps:
  • 120V: 24A
  • 240V: 23A
OCV:
  • TIG: 90V
  • Stick: 90V
TIG Output Range DC:
  • 120V: 5A-125A/10.2V-15V
  • 240V: 5A-200A/10.2V-18V
TIG Output Range AC:
  • 120V: 20A-125A/ 10.8V-15V
  • 240V: 20A-200A/10.8V-18V
Stick Ouput Range DC:
  • 120V: 5A-100A/ 20.2V-24V
  • 240V: 5A-160A/20.2V-26.4V
Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Auto Adaptive Hot Start
6010/Cellulose Capable:
Limited to 6011
Minimum Amp DC TIG Start:
5A
Minimum Amp AC TIG Start:
20A
TIG Start Type:
  • HF
  • Lift TIG
TIG Start Type:
HF and Lift Start
Memory:
No
End Amp Range:
Fixed Minimum
Down slope Time:
Adjustable
Minimum Maxmimum
  • Weld steel to a maximum of 5/16" single pass (240V)
  • Weld steel to a maximum of 3/16" single pass (120V)
  • Weld steel to a maximum of 1/2" multi-pass(240V)
  • Weld steel to a maximum of 5/16" multi-pass (120V)
  • Weld aluminum to a maximum of 5/16" single pass (240V)
  • Weld aluminum to a maximum of 1/8" single pass (120V)
  • Weld aluminum to a maximum of 3/8" multi-pass (240V)
  • Weld aluminum to a maximum of 1/4" multi-pass (120V)
  • Weld to a minimum of .007" Steel
  • Weld to a minimum of .020" Aluminum
  • Weld with a minimum of 1.6 mm (1/16") diameter electrode
  • Weld with a maximum of 3.2 mm (1/8") diameter electrode (240V)
  • Weld with maximum of 2.4 mm - 3.2 mm) (3/32"-1/8")diameter electrode (120V)
Optional Equipment
  • Everlast Series Rotating Head TIG Torches
  • Everlast Series Slim Line Flex Neck Series
  • Everlast Series ProFlex Series
  • Amperage Slide Control
  • WC375 Water  Cooler
  • ProCart
  • Welder Cover
Notes For generator use:  Use only generators that are certified as "clean power" by the manufacturer.  This means that the unit has less than 5% THD (total harmonic distortion)