Storm 215C

$1,725.00

Need To Know:

  • MIG, Stick and Plasma Cutter All-In-One 
  • 200A MIG, 160A Stick, 40A Plasma
  • Easy to Read LCD screen
  • Compact, easy to carry case
  • 35% Duty Cycle at Max. Output
  • Dual Voltage 120/240V Input
  • Spool Gun Capable
  • Arc Force and Hot Start Control For Stick
  • MIG Inductance Control
  • AK15 North MIG Gun installed with a Blue STEEL Liner for wire/tip sizes 0.6/0.8mm (.023/0.030") (subject to change)
  • PowerSet Mode for True Synergic Operation
  • Digital Display Screen
  • 4" and 8" Spool Capacity (2 to 12 lbs)
  • Flux-Core Setting
  • Cut up to 1/2" clean cut, Severe up to 5/8"+
  • (S45 Consumables)
  • Stick Weld with up to 1/8" to 5/32" Electrode

In stock

Storm 215C $1,725.00

Everlast continues its tradition of innovation and industry firsts with the new multi-process Storm 215c. This new Multi-Process unit features a unique combination of MIG, Stick and Plasma Cutting processes.  A sustantial duty cycle rating of 35% at the maximum rating of 200A MIG, 160A Stick and 40A plasma, means this unit is a serious fabrication and portable repair tool that fits well in home garage, auto-body outlet, fabrication shop or even service truck.   With a lengthy list of frequently requested features in each process, the unit offers no compromise performance and adjustability for the professional welder.  The compact size of the unit is definitely a shop space saver and lends itself to portable operations as well.  The advanced synergic function of the PowerSet mode allows almost any user to quickly set up and attain near perfect settings without having to consult door charts, or calculator apps, making it perfect for the novice welder or for the pro who is in a hurry to get welding.  The PowerSet mode will preset Volts, Amps and other features so that you don’t have to go through a lengthy setup process. Of course, it does also allow fine tuning of the main settings of Volts and Amps where applicable if you need to make adjustments for differences in welding position and personal welding styles. AK15 North MIG Gun installed with a Blue STEEL Liner for wire/tip sizes 0.6/0.8mm (.023/0.030″) (subject to change)

For those interested in portable repair operations, the unit requires just 8500 Surge watts of clean (5% or less THD) 240V power to operate from a generator. (Consult generator manufacturer about THD level prior to purchase of generator to confirm that it meets 5% or less THD.)

Features & Benefits
  • MIG, Stick and Plasma All-In-One
  • GMAW/SMAW/PAC Operation (MIG/Stick/Plasma)
  • Professional Class Duty Cycle @ 35%
  • High flow continuous fan cooling
  • Burn back control
  • Cast aluminum heavy duty wire feeder drive housing
  • Euro Quick connect series 15 MIG gun (Binzel/Trafimet compatable)
  • AK15 MIG Gun installed with a Blue STEEL Liner for wire/tip sizes 0.6/0.8mm (.023/0.030") (subject to change)
  • Inductance and Arc force control useful for fine tuning arc characteristics in MIG and Stick modes
  • Large, Bright LCD Color Display allows precise and repeatable setting of welding parameters
  • Suitcase size, holds up to a 8" (10-12lb) roll of welding wire. 4" wire roll (2lb.) use is possible.
  • PowerSet mode for true synergic operation and fast setup
  • 2 roller wire feed
  • Dual Voltage 120/240V
  • Digitally Controlled IGBT Inverter
  • Up to 600 IPM wire feed speed
What's Included
  • AK24 North MIG Gun - 3m installed with a RED STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/0.045") (subject to change)
  • iPT-40 Plasma Torch - 4m (S45 Consumables)
  • Work clamp with 3m cable and 35 series DINSE-style connector
  • Stick electrode holder with 3m cable and 35 series DINSE-style connector
  • Everlast Air pressure regulator and gauge with water trap
  • 3m Power Input cable with 6-50 NEMA Style Plug
  • 240/120v Pig Tail Adapter
Tech Specs
Type:
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, DC Stick, Plasma
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated MIG Amps:
  • 120V@ 125A
  • 240V @ 200A
Max Rated STICK Amps:
  • 120v@ 100A
  • 240V @ 160A
Max Rated PLASMA Amps:
  • 120V @ 25A
  • 240V @ 40A
MIG Amps/Volts @ Rated Duty Cycle:
120V:
  • 125A/20.5V @ 35% Duty Cycle/40º C
240V:
  • 200A/24V @ 35% Duty Cycle/40º C
STICK Output Amps/Volts @ Rated Duty Cycle:
120V:
  • 100A/24V @ 35% Duty Cycle/40º C
240V:
  • 160A/25.4V @ 35% Duty Cycle/40º C
PLASMA Amps/Volts @ Rated Duty Cycle:
120V
  • 25A/90V @ 35% Duty Cycle/ 40º C
240V
  • 40A/96V @ 35% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
  • @120V:  35A
  • @240V:  33A
 
Maximum Rated (I1EFF ) Input Amps:
  • @120V:  21A
  • @240V:  20A
OCV:
  • MIG/STICK: 74V
  • Plasma:  280V
MIG Output Range:
120V:  30A-125A/15.5-20.25V 240V:  20A-200A/15.5-24V
STICK Output Range :
120V:  10A-100A/20.4-24V 240V:  10A-160A/20.5V-26.4V
PLASMA Output Range :
120V:  20A-25A/88-90V 240V: 20A-40A/88-96V
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes, Optional. (Not Included)
Pulse:
NO
Standard Drive Roll wire size:
.030”-.035”
Separate wire feeder:
No, self contained
Number of Drive rollers:
2
Max Wire Feed Speed:
600 IPM
Max Wire Roll Diameter:
8” (up to 12 lb)
Memory:
No
Upslope Time:
0-1S
Down Slope Time:
0-1S
Preflow time:
Auto/0-10S
Post Flow Time:
Auto/0-10S
Flux Core:
Yes, Optional
2T/4T/Torch latch/Trigger:
Yes
Plasma Cutter Arc Start Type:
Blow Back (Piston Type)
Pilot Arc:
Yes
Torch Type:
Innotec iPT 40 - 4m (S45 Consumables)
Recommended Cutting Air Pressure:
65-72 While Cutting
Recommended Compressor Capacity:
20 Gallon, 4.5CFM @ 90 PSI
OK-to-Cut Indicator/Low Air Pressure Safety::
Yes
Other Features:
PowerSet More for Synergic Operation
BurnBack Timer
Suggested Wire Sizes .023" - .045"
This unit is not designed to weld with E6010 Electrodes.
Minimum Maxmimum MIG Weld:
  • Up to a maximum of 5/16"  Steel/Stainless single pass weld* 240V
  • Up to a maximum of 1/2"  Steel/Stainless multiple pass weld 240V
  •  A minimum of 24 gauge Steel/Stainless** 120/240V
  • A maximum of 1/8" Steel/Stainless single pass weld 120V
  • A maximum of 1/4"  Steel/Stainless multi-pass weld 120V
  • Up to a maximum of 3/16" Aluminum single pass weld* 240V
  • Up to a maximum of 3/8" Aluminum multiple pass weld 240V
  • Up to a minimum of 14 gauge Aluminum** 120/240V
  • Up to a maximum of 1/8" Single pass weld 120V
Weld up to a maximum of 3/16" Multi-pass weld 120V Stick Weld:
  • Weld with a maximum of 3/32" diameter electrode (Maximum electrode diameter ultimately depends upon type and manufacturer) (120V)
  • Weld with a minimum of 1/16" diameter electrode. (120V)
  • Weld with a maximum of 1/8" t0 5/32" diameter electrode (Maximum electrode diameter ultimately depends upon type and manufacturer) (240V)
  • Weld with a minimum of 1/16" diameter electrode (240V)
NOTE: This unit is not designed to weld E6010 electrodes.  Use E6011 instead.   Plasma Cut:
  • Up to 3/8" daily use @ 10-15 ipm (240V)
  • Up to 1/2" clean cut @ 8-12 ipm (240V)
  • Up to 5/8" severance cut @ 3-5 ipm (240V)
  • Up to 1/8" daily use @ 15 to 20 ipm (120V)
  • Up to 1/4" clean cut @ 8 to 12 ipm (120V)
  • Up to 5/16" severance cut @ 3-5 ipm (120V)
  • Max Pierce 1/4" (240V)
  • Max Pierce 1/8" (120V)
  • Minimum practical cut 24-28 gauge with standad cutting tips
Plasma cutting quality + capacity is affected by several factors.
Optional Equipment
  • Spool gun with 25 ft. cable and Euro fast connect fitting. (Not Included)
  • MIG consumable kits
  • Liners
  • Plasma Consumables kits (S45 Consumables)
  • Various size MIG/Flux core drive rolls.
Notes
Minimum Generator Wattage needed for maximum output on 240V: 8500 W Use only with a generator rated by its manufacturer as "clean power" if using with a generator.  Consult manufacturer of generator for certification. Everlast does not approve or endorse generator brands or models, however, if the damage to the welder occuring from use with a generator not labeled as producing clean power by its manufacturer is not warrantable. AK24 North MIG Gun installed with a RED STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/0.045") (subject to change) This unit is not recommended for welding with E 6010 electrodes