Add to cart

PowerPlasma 25i XTR

$550.00

IGBT Inverter Plasma Cutter
25 Amps of cutting power
Features a " blow-back" iPT 25i torch (4m) (S45 Consumables)
Inexpensive consumables can usually be bought locally
35% duty cycle
OverCurrent/Duty Cycle indicators and auto interrupt help protect the machine
OK-to-cut indicator/feature indicates when air pressure is sufficient to make a cut, and automatically stops output if air pressure is too low or has become disconnected

Download Product Manual

In stock

Add to wishlist

Description
More Information

For those looking for the ultimate 120V only plasma cutter with the best cutting performance and portability in the industry, the Everlast PowerPlasma 25i XTR delivers. With a maximum of 25 Amps output, the unit will sever up to 3/8″, but also will deliver beautiful cuts right up to 1/4″ thick with decent cut speed and low amounts of dross. With a modern, blow-back style torch the unit avoids the pitfalls of old cheaper High Frequency designs, which include electronic interference and constant maintenance of the High Frequency points.

The unit has a simple front, single knob panel which outlines the expected output capacity on 15A, 20A, and 30A breakers. This acts as a guide to prevent accidental tripping of the breakers, if a 30A breaker isn’t available. This unit is perfect for operating on 4000 Watt Clean Power (5% or less THD) rated 120V generators.

As far as compressors go, this unit will operate on almost any 20 gallon compressor with moderate cutting. For heavy cutting, consider a 30 gallon compressor.

Features & Benefits	IGBT Inverter Plasma Cutter Euro style "Central" quick connect torch adapter Features a " blow-back" iPT 25i torch (4m) (S45 Consumables) Inexpensive consumables can usually be bought locally 35% duty cycle Exceptionally clean cuts and less bevel with the new iPT 25 torch OverCurrent/Duty Cycle indicators and auto interrupt help protect the machine OK-to-cut indicator/feature indicates when air pressure is sufficient to make a cut, and automatically stops output if air pressure is too low or has become disconnected NOTE: When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD)
What's Included	iPT25 - 4m Plasma Torch with Euro quick-connect central adapter(S45 Consumables) Work clamp with 1.8m cable and 25 series DINSE style connector Regulator/Water trap (this is not an air dryer) Consumable Starter Kit 1.8m Power input cable Plug Adaptor from 20A to 15A
Tech Specs	Type: IGBT Voltage/phase: 120V Output Amp/Volt Range: 110V: 10-20A / 84-90V OCV: 400V Max Inrush ( I1MAX ) Amps: 110V: 30A Maximum Rated (I1EFF ) Input Amps: 110V: 18A Duty Cycle At Rated Amps/Volts: 120V: 35% @ 25A/90V Arc Start Type: Blow Back (Piston type) PilotArc: Yes Torch Type: Innotec iPT 25 (S45 Consumables) CNC Interface Port: No Adjustable Post Flow Timer: No Gouging: Not Recommended Recommended Cutting Air Pressure: 55-65 psi Recommended Compressor Capacity: 3.5 cfm with 25 gallon tank OK-to-Cut Indicator/Low Air pressure safety: Yes
Minimum Maxmimum	Up to 1/8" daily use Up to 1/4" clean cut @ 8-12 ipm Up to 3/8" severance cut @ 3-5 ipm Max Pierce Up to 1/4" Plasma cutting quality + capacity is affected by several factors.
Optional Equipment	Consumable Kit (S45 Consumables) Welding Cart
Notes	A separate air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture. When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD).

PowerPlasma 25i XTR

Related products