PowerPlasma 52i

$1,025.00

  • 50 Amps of professional cutting power
  • CNC port for light gauge CNC use
  • Blow-back start technology
  • Pilot Arc
  • Italian Designed iPT-60i torch (4m)
  • CNC port for use with small plasma tables up to 1/4" cut (220V)
  • Rugged IGBT Construction
  • Dual Voltage 120/240V
  • Product Dimensions: 16" x 7" x 12"

In stock

PowerPlasma 52i $1,025.00

The PowerPlasma 52i is an IGBT plasma cutter that is capable of cutting 1/2″ and can sever up to 3/4″ thick steel.  The PowerPlasma 52i offers plenty of capability for the average small fab shop or hobbyist.  The small size lends itself well to portability and is a space saver in the shop or service truck.  The latest generation Everlast PowerPlasma 52i is fully digital and features the Italian designed iPT 60i torch.  This torch is an improvement over the older series of torches.  The new iPT 60 torch (4m) offers improved consumable life, with more competitve pricing for consumables.  The new tip saver function will also help to limit Pilot arc time and extend consumable life.  CNC port is also standard on this unit for cuts up to 1/4″.

 
Features & Benefits
  • IGBT Inverter Plasma Cutter
  • Dual Voltage 120/240 V for maximum portability
  • Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life
  • Euro style "Central" quick connect torch adapter
  • Features a " blow-back" iPT 60i torch (4m)
  • Inexpensive consumables can usually be bought locally
  • 60% duty cycle is fit for commercial use
  • Exceptionally clean cuts and less bevel with the new iPT 60 torch
  • OverCurrent/Duty Cycle indicators and auto interrupt help protect the machine
  • OK-to-cut indicator/feature indicates when air pressure is sufficient to make a cut, and automatically stops output if  air pressure is too low or has become disconnected
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
  • NOTE: When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD)
  • Product Dimensions: 16" x 7" x 12"
What's Included
  • iPT60 - 4m Hand Held Plasma Torch with Euro quick-connect central adapter
  • Work clamp with 1.8m cable and 25 series DINSE style connector
  • Regulator/Water trap (this is not an air dryer)
  • Consumable Starter Kit
  • 1.8m Power input cable with NEMA 6-50 Plug
  • 240/120v Pig Tail Adapter
Tech Specs
Type:
IGBT
Voltage/phase:
Dual Voltage 120/240 1 Phase
Output Amp/Volt Range:
  • 110V: 20A/88V-25A/90V
  • 220V: 20A/88V-50A/100V
OCV:
200V
Max Inrush ( I1MAX ) Amps:
  • 110V: 32.1A
  • 220V: 35.8A
Maximum Rated (I1EFF ) Input Amps:
110V: 24.9A 220V: 27.9A
Duty Cycle At Rated Amps/Volts:
120V:  60% @ 25A/90V 220V: 60% @ 50A/100V
Arc Start Type:
Blow Back (Piston type)
PilotArc:
Yes
Torch Type:
Italian designed iPT 60i
CNC Interface Port:
Yes
Adjustable Post Flow Timer:
Yes
Gouging:
Not Recommended
Recommended Cutting Air Pressure:
72-75 psi
Recommended Compressor Capacity:
5.0 cfm or better with 25 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Yes
Minimum Maxmimum
  • Up to 1/2" daily use @ 15-20 ipm
  • Up to 9/16" clean cut @ 8-12 ipm
  • Up to 3/4" severance cut @ 3-5 ipm
  • Max Pierce CNC Up to 1/4"
Plasma cutting quality + capacity is affected by several factors.
Optional Equipment
  • Consumable Kit
  • Welding Cart
Notes
  • When using the CNC port with a plasma table, the unit should be limited to 40 amps which is the 100% duty cycle level of the machine if it is to be used continuously.
  • A separate air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear.
  • The unit includes a regulator/water trap, but is not designed to remove all water or moisture.
  • When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD).
  • Product Dimensions: 16" x 7" x 12"