The benefits of the PowerTIG 210EXT digital microprocessor are numerous, it helps increase productivity and and weld quality. The Everlast PowerTIG 210EXT allows you to make precise settings and fine tune them to the exact standards required. This TIG/Stick welder from Everlast also features IGBT inverter technology which offers the best in arc stablity and performance while reducing size and weight. The unit features wave form control with three distinct wave forms: Advanced Square wave, Soft Square wave and Triangular that offer flexibility while welding aluminum. The Everlast PowerTIG 210EXT features programmable memory, adjustable AC Frequency, and adjustable AC balance control. The stick welder function features adjustable hot start and arc force control for maximum welding flexibility. The PowerTIG 210EXT features two pulse modes, standard and advanced pulse. In the advanced pulse mode the welder oscillates between AC and DC polarity allowing fine fast freeze control on thin gauge aluminum, and greater penetration on thick plate aluminum. The Everlast PowerTIG 210EXT may seem quite complex with its list of features, but it is really quite simple because of the intuitive design which leads to quick and easy setup whether you are a welding professional or just an enthusiast.
PowerTIG 210EXT
$2,475.00
- HV/HF arc starting: No Points to adjust.
- Fan on Demand upon arc start (**Water Cooler will still run continuously**)
- 120/240V IGBT Module inverter design
- Digital Microprocessor Control
- Commercial 60% Duty Cycle at 210 Amps
- 240V Outlet in rear for optional WC375 water cooler
- AC/DC TIG/DC Stick functions
- Improved HF Start
- AC Frequency/Balance control
- 3 wave AC Wave forms, Advanced Square, Soft Square, and Triangular
- Standard and Advanced AC pulse
- Adjustable Stick Hot Start/Arc Force
- 9 Channel Programmable Memory
- Unit Dimensions: 25" x 10" x 18"
In stock
| Features & Benefits |
|
|---|---|
| What's Included |
|
| Tech Specs |
IGBT Type:
Module IGBT
Inverter Type:
Digital/Micro-controlled
Output Type:
AC/DC TIG, DC Stick
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps:
210 A
Max Rated Stick Amps:
160A
TIG Amps @ Rated Duty Cycle:
Stick Amps @ Rated Duty Cycle:
@120V:
Max Inrush ( I1MAX ) Amps:
Maximum Rated (I1EFF ) Input Amps:
OCV:
TIG Output Range DC:
TIG Output Range AC:
Stick Output Range DC:
Stick Hot Start Amps:
0-100%
Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Adjustable Hot Start
Stick Hot Start Time:
0-2 Seconds
6010/Cellulose Capable:
Yes (Short Arc) Limited to 6011
Minimum Amp DC TIG Start:
5A
Minimum Amp AC TIG Start:
5A
TIG Start Type:
HF and Lift Start
Memory:
Yes
Start Amp Range:
120V:
End Amp Range:
120V:
Upslope Time:
0-25 Seconds
Down Slope Time:
0-25 Seconds
Preflow time:
0-25 Seconds
Post Flow Time:
0-50 Seconds
TIG Pulse:
Yes
Standard DC Pulse Frequency:
.1-500 Hz
Standard AC Pulse Frequency:
.1-250 Hz Advanced Square Wave
.1-10 Hz Soft Square, Triangular
AC Advanced Pulse Frequency:
.1-10 Hz
Pulse Time On (Duty Cycle):
5-100%
Pulse Amp Range:
5-99% of Welding Amps
AC Frequency (Hz):
20-250 Hz
AC Balance Range:
5-90% of EP (+)
AC Wave Forms:
Remote Control:
2T/4T with Torch Amptrol settings
Foot Pedal:
NOVA
|
| Minimum Maximum |
|
| Optional Equipment |
|
| Notes | For generator use: Use only generators that are certified as "clean power" by the manufacturer. This means that the unit has less than 5% THD (total harmonic distortion) |
Related products
-
- Advanced Digital IGBT Inverter Technology.
- HD (720) 5.1" LCD color screen with easy to read contrast.
- Intuitive navigation and layout of settings.
- #20 water cooled included (water cooler sold seperately)
- Power Factor Correction.
- 240V 1 and 3 Phase operation.
- F.A.C.C.T. (Fan and Cooler Control Technology)
- 5 AC Wave forms: Adv. Square, Soft Square, Trapezoid, Triangle, and Sine.
- Split AC Wave form control technology. Select wave form shape of individual half-waves in AC.
- Independent Amplitude Control over EN and EP Amps in AC.
- DC Wave form shaping for more control.
- DC Pulse up to 999.9 Hz. AC Pulse up to 400 Hz.
- AC Adv. Pulse (Mixed AC/DC pulse up to 10 Hz) increases Aluminum penetration similar to 500A or greater of standard machines.
- AC frequency up to 400Hz.
- True low amp starts measured at 5A DC and 5A AC.
- Single page layout without hidden menus to access.
- Almost all settings visible at a glance.
- Capacitive HV/HF arc starting: No Points to adjust.
- Selectable to start Electrode Positive or Electrode Negative.
- Selectable for Tungsten size for quicker starts.
- Advanced PowerSet menu makes setup easy and quick.
- 40% Duty Cycle TIG and Stick at max output.
- 330A TIG/ 275A Stick maximum output.
- 30 program memory with lock function to prevent tampering.
-
- Digitally controlled IGBT inverter
- *Not water cooler capable*
- Analog style controls
- 120V/240V Dual Voltage
- 35% Duty Cycle at 185 Amps/ 240V
- 35% Duty Cycle at 125 Amps/ 120V
- AC/DC TIG
- DC Stick functions
- Simple to use TIG pulse @ 1 or 50 Hz
- HF or Lift TIG start
- AC Frequency/Balance control
- Standard AC Advanced Square Wave
- Unit Dimensions: 21" x 7.5" x 13"
-
- 1 phase input, 220/240 v
- New Feature: Spot Timer
- HV/HF arc starting: No Points to adjust.
- Fan on Demand upon arc start (**Water Cooler will still run continuously**)
- Rugged Digital IGBT Inverter
- AC/DC TIG
- DC Stick functions
- HF or Lift TIG start
- Pulse up to 500 Hz DC; 250 Hz AC
- 240V Outlet in rear for optional WC375 water cooler
- #20 water cooled included (water cooler sold seperately)
- Advanced Square, Soft Square, Triangular, and Sine wave forms
- Adjustable Stick Arc force and Hot Start Control
- Advanced AC Pulse and Standard Pulse AC/DC
- 9 programmable channels to save favourite settings
-
- HV/HF arc starting: No Points to adjust.
- Fan on Demand upon arc start (**Water Cooler will still run continuously**)
- Rugged Digital IGBT Inverter
- Industrial 60% Duty Cycle at 250 Amps
- AC/DC TIG
- DC Stick functions
- #20 water cooled included (water cooler sold separately)
- HF or Lift TIG start
- Pulse up to 500 Hz DC; 250 Hz AC
- Advanced Square, Soft Square, Triangular
