PowerTIG 325EXT

$3,575.00

  • 1 phase input, 220/240 v
  • New Feature: Spot Timer
  • HV/HF arc starting: No Points to adjust.
  • Fan on Demand upon arc start (**Water Cooler will still run continuously**)
  • Rugged Digital IGBT Inverter
  • AC/DC TIG
  • DC Stick functions
  • HF or Lift TIG start
  • Pulse up to 500 Hz DC; 250 Hz AC
  • 240V Outlet in rear for optional WC375 water cooler
  • #20 water cooled included (water cooler sold seperately)
  • Advanced Square, Soft Square, Triangular, and Sine wave forms
  • Adjustable Stick Arc force and Hot Start Control
  • Advanced AC Pulse and Standard Pulse AC/DC
  • 9 programmable channels to save favourite settings
 

In stock

PowerTIG 325EXT $3,575.00

The PowerTIG 325EXT is a digital inverter based welder built for superior industrial performance.  The PowerTIG 325EXT offers up to 320 amps of TIG welding power within a reliable and serviceable platform designed for years of service. For welding aluminum, 325EXT’s Advanced Pulse in AC greatly increases penetration while Wave Form Control, AC Frequency and AC Balance Controls combine to ensure an all round positive experience. 

DC functions are not to be ignored. Plenty of features such as standard pulse frequency up to 500 Hz, and a wide range of adjustable 2T/4T functions add to this welder’s exceptional capabilities. The standard PowerTIG 325 EXT listed here is 240V, single phase.

(water cooler sold seperately)

Features & Benefits
  • New Bezel and stackable feature!
  • HV/FAN ON DEMAND
  • Spot Timer
  • Digital microprocessor control
  • IGBT Power Modules
  • True low amp operation down to 5 amps DC and 10 amp AC
  • 2T/4T/ Pedal operation modes with additional 2T/4T mode for torch amptrol operation.
  • Wave form control in AC provides 4 wave forms: Sine, Triangular, Soft Square and Advanced Square Wave
  • Easy Start Up feature in AC or DC modes to make setup quick and easy for the beginner, or the advanced user
  • Pulse up to 500Hz in DC, 250 Hz AC
  • 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals
  • Arc force control, Hot start time, Hot start intensity settings for Stick welding
  • NOVA Pedal
What's Included
  • 7.5m Everlast #20 Series (water cooled) TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation
  • 7.5m Everlast #9 Series (air cooled) TIG torch with 35 DINSE style connectors  and torch switch for 2T/4T operation
  • Heavy Duty Stick electrode holder with 3m cable and 35 series DINSE style connectors
  • Heavy Duty Work clamp with 3m Cable and DINSE style connectors
  • NOVA foot pedal
  • Everlast Argon Regulator
  • Basic Consumable Starter Kit (Tungsten not included)
  • 1.8m Power input cable with NEMA 6-50 plug
Tech Specs
IGBT Type:
Module IGBT
Inverter Type:
Digital/Micro-controlled
Output Type:
AC/DC TIG, DC Stick
Voltage/phase:
220/240 V 1/3 PHASE
Max Rated TIG Amps:
320A
Max Rated Stick Amps:
250A
TIG Amps @ Rated Duty Cycle:
  • 320A/22.8V @ 35% Duty Cycle/40º C
  • 250A/20V @ 60% Duty Cycle/ 40º C
  • 200A/18V @ 100% Duty Cycle/ 40º C
Stick Amps @ Rated Duty Cycle:
  • 250A/30V @ 35% Duty Cycle/ 40º C
  • 200A/28V @ 60% Duty Cycle/ 40º C
  • 160A/ 26.4V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
  • 220V (1):  50A
  • 220V (3): 29A
Maximum Rated (I1EFF ) Input Amps:
  • 220V (1): 30A
  • 220V (3): 18A
OCV:
  • TIG: 80V
  • Stick: 80V
TIG Output Range DC:
5A-320A/ 10.2V-22.8V
TIG Output Range AC:
10A-320A/ 10.4V-22.8V
Stick Ouput Range DC:
20A-250A/ 20.8V-30V
Stick Hot Start Amps:
Auto regulated
Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Auto Adaptive Hot Start
Minimum Amp DC TIG Start:
10A (+/-2A)
Minimum Amp AC TIG Start:
10A (+/-2A)
TIG Start Type:
  • HF
  • Lift TIG
TIG Start Type:
HF and Lift Start
Start Amp Range:
10A-320A
End Amp Range:
10A-320A
Upslope Time:
0-10 Seconds
Down Slope Time:
0-25 Seconds
Preflow time:
0-10 Seconds
Post Flow Time:
0-25 Seconds
TIG Pulse:
Yes
Standard DC Pulse Frequency:
.5-500Hz
Standard AC Pulse Frequency:
.5-250Hz
Pulse Time On (Duty Cycle):
10-90%
Pulse Amp Range:
5-95% of welding amps
AC Frequency (Hz):
20-250Hz
AC Balance Range:
10-90% of Electrode Positive
AC Wave Forms:
  • Advanced Square Wave
  • Soft square
  • Triangular
  • Sine (wave)
Remote Control:
2T/4T with Torch Amptrol settings
Foot Pedal:
NOVA
Minimum Maxmimum TIG:
  • Weld steel to a maximum of 1/2" single pass
  • Weld steel to a maximum of 1+" multi-pass
  • Weld aluminum to a maximum of 1/2" single pass
  • Weld aluminum to a maximum of 1+" multi-pass
  • Weld to a minimum of .005" Steel
  • Weld to a minimum of .010" Aluminum
TIG ratings based on industry standard practices and practical limits associated with producing quality welds. The maximum thickness for AC includes the use of the AC advanced pulse with a high DC pulse current value. Stick:
  • Weld with a minimum of 1/16" diameter electrode
  • Weld with a maximum of 3/16" diameter electrode
Maximum Stick electrode capability is ultimately determined by electrode class, composition and manufacturer recommendations.
Optional Equipment
  • Everlast Series Rotating Head TIG Torches
  • Everlast Series Slim Line Flex Neck Series
  • Everlast Series ProFlex Series
  • Amperage Slide Control
  • WC375 Water  Cooler
  • ProCart
  • Welder Cover
Notes Product Notes: For generator use:  Use only generators that are certified as "clean power" by the manufacturer.  This means that the unit has less than 5% THD (total harmonic distortion)This unit is wired for Single Phase ONLY.If you require 3 phase on this unit - It MUST be noted at the point of sale.